ࡱ> _ b{bjbjzyzy ;6b6bWr JJ8l~U6 ^ (!!!!&" )"5555555$M7:5#!!##5!!6...#r!!4.#5..0H,3!0/I'34%60U6$3:B(|:,3,3:@31""S".k""1"1"1"55+1"1"1"U6####:1"1"1"1"1"1"1"1"1"JB : SECTION 122413 ROLLER WINDOW SHADES GENERAL RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division01 Specification Sections, apply to this Section. SUMMARY Section Includes: EDIT SUBPARAGRAPHES BELOW AS REQUIRED. Manually operated roller shades with [single] [double] rollers. Motor-operated roller shades with [single] [double] rollers. Related Requirements: Section061053 "Miscellaneous Carpentry" for wood blocking and grounds for mounting roller shades and accessories. Section079200 "Joint Sealants" for sealing the perimeters of installation accessories for light-blocking shades with a sealant. SUBMITTALS Product Data: For each type of product. Include construction details, material descriptions, dimensions of individual components and profiles, features, finishes, and operating instructions for roller shades. Shop Drawings: Show fabrication and installation details for roller shades, including shadeband materials, their orientation to rollers, and their seam and batten locations. Provide plans, elevations, sections, product details, installation details, operational clearance and relationship to adjacent work. Motor-Operated Shades: Include details of installation and diagrams for power, signal, and control wiring. RETAIN "SAMPLES" PARAGRAPH BELOW FOR SINGLE-STAGE SAMPLES, WITH A SUBORDINATE LIST IF APPLICABLE. RETAIN "SAMPLES FOR INITIAL SELECTION" AND "SAMPLES FOR VERIFICATION" PARAGRAPHS FOR TWO-STAGE SAMPLES. Samples: For each exposed product and for each color and texture specified, 10 inches (250 mm) long. Samples for Initial Selection: For each type and color of shadeband material. Include Samples of accessories involving color selection. Samples for Verification: For each type of roller shade. Shadeband Material: Not less than 10 inches (250 mm) square. Mark interior face of material if applicable. Roller Shade: Full-size operating unit, not less than 16 inches (400 mm) wide by 36 inches (900 mm) long for each type of roller shade indicated. Installation Accessories: Full-size unit, not less than 10 inches (250 mm) long. Product Schedule: For roller shades.[Use same designations indicated on Drawings.] Qualification Data: For Installer. Product Certificates: For each type of shadeband material. Product Test Reports: For each type of shadeband material, for tests performed by manufacturer and witnessed by a qualified testing agency. Operation and Maintenance Data: For roller shades to include in maintenance manuals. QUALITY ASSURANCE Installer Qualifications: Fabricator of products. Mockups: Build mockups to verify selections made under Sample submittals, to demonstrate aesthetic effects, and to set quality standards for fabrication and installation. Approval of mockups does not constitute approval of deviations from the Contract Documents contained in mockups unless Architect specifically approves such deviations in writing. Subject to compliance with requirements, approved mockups may become part of the completed Work if undisturbed at time of Substantial Completion. Anti-Microbial Characteristics: 'No Growth' per ASTM G 21 results for fungi ATCC9642, ATCC 9644, ATCC9645. DELIVERY, STORAGE, AND HANDLING Deliver roller shades in factory packages, marked with manufacturer, product name, and location of installation using same designations indicated on Drawings. FIELD CONDITIONS Environmental Limitations: Do not install roller shades until construction and finish work in spaces, including painting, is complete and dry and ambient temperature and humidity conditions are maintained at the levels indicated for Project when occupied for its intended use. Field Measurements: Where roller shades are indicated to fit to other construction, verify dimensions of other construction by field measurements before fabrication and indicate measurements on Shop Drawings. Allow clearances for operating hardware of operable glazed units through entire operating range. Notify Architect of installation conditions that vary from Drawings. Coordinate fabrication schedule with construction progress to avoid delaying the Work. WARRANTY Roller Shade Hardware and Chain Warranty: Manufacturer's standard non-depreciating twenty-five year limited warranty. Standard Shadecloth: Manufacturer's standard twenty-five year warranty. Roller Shade Motors and Motor Control Systems: Manufacturer's standard non-depreciating five year warranty. Roller Shade Installation: One year from date of Substantial Completion, not including scaffolding, lifts or other means to reach inaccessible areas. PRODUCTS MANUFACTURERS  HYPERLINK "http://www.specagent.com/Lookup?ulid=12336" Manufacturers: Subject to compliance with requirements, provide products by one of the following:  HYPERLINK "http://www.specagent.com/Lookup?uid=123457025558" Draper Inc.  HYPERLINK "http://www.specagent.com/Lookup?uid=123457025559" Hunter Douglas Contract.  HYPERLINK "http://www.specagent.com/Lookup?uid=123457025561" Lutron Electronics Co., Inc.  HYPERLINK "http://www.specagent.com/Lookup?uid=123457025562" MechoShade Systems, Inc. Solarfective. Source Limitations: Obtain roller shades from single source from single manufacturer. THE ARTICLE BELOW DESCRIBES A SINGLE LIGHT FILTERING SHADE. IF YOU ARE, DOING A LIGHT BLOCKING SHADE THE ARTICLE WILL NEED TO RE-EDITTED FROM THE MASTER. MANUALLY OPERATED SHADES WITH SINGLE ROLLERS Chain-and-Clutch Operating Mechanisms: With continuous-loop bead chain and clutch that stops shade movement when bead chain is released; permanently adjusted and lubricated. Bead Chains: Manufacturer's standard. Loop Length: Full length of roller shade. Limit Stops: Provide upper and lower ball stops. Chain-Retainer Type: Clip, jamb mount. Spring Lift-Assist Mechanisms: Manufacturer's standard for balancing roller shade weight and for lifting heavy roller shades. Provide for shadebands that weigh more than 10 lb (4.5 kg) or for shades as recommended by manufacturer, whichever criterion is more stringent. Rollers: Corrosion-resistant steel or extruded-aluminum tubes of diameters and wall thicknesses required to accommodate operating mechanisms and weights and widths of shadebands indicated without deflection. Provide with permanently lubricated drive-end assemblies and idle-end assemblies designed to facilitate removal of shadebands for service. Roller Drive-End Location: Right side of interior face of shade. Direction of Shadeband Roll: Regular, from back (exterior face) of roller. Shadeband-to-Roller Attachment: Manufacturer's standard method. Mounting Hardware: Brackets or endcaps, corrosion resistant and compatible with roller assembly, operating mechanism, installation accessories, and mounting location and conditions indicated. Shadebands: Shadeband Material: Light-filtering fabric. Shadeband Bottom (Hem) Bar: Steel or extruded aluminum. Type: Enclosed in sealed pocket of shadeband material. Color and Finish: As indicated in Interior Finish Legend on Drawings. Installation Accessories: SELECT ONE OF THE NEXT TWO SUBPARAGHES RETAIN "FRONT FASCIA" FOR EXPOSED ROLLER ENCLOSURES. FRONT FASCIA: ALUMINUM EXTRUSION THAT CONCEALS FRONT AND UNDERSIDE OF ROLLER AND OPERATING MECHANISM AND ATTACHES TO ROLLER ENDCAPS WITHOUT EXPOSED FASTENERS. Shape: L-shaped. Height: Manufacturer's standard height required to conceal roller and shadeband assembly when shade is fully open, but not less than 4 inches (102 mm). RETAIN "RECESSED SHADE POCKET" SUBPARAGRAPH BELOW FOR ROLLER ENCLOSURE INSTALLED ABOVE THE CEILING. Recessed Shade Pocket: Rectangular, extruded-aluminum enclosure designed for recessed ceiling installation; with front, top, and back formed as one piece, end plates, and removable bottom closure panel. Height: Manufacturer's standard height required to enclose roller and shadeband assembly when shade is fully open, but not less than 6 inches (152 mm). Provide pocket with lip at lower edge to support acoustical ceiling panel. Endcap Covers: To cover exposed endcaps. Closure Panel and Wall Clip: Removable aluminum panel designed for installation at bottom of site-constructed ceiling recess or pocket and for snap-in attachment to wall clip without fasteners. Closure-Panel Width: 2 inches (51 mm). Installation Accessories Color and Finish: As selected from manufacturer's full range. THE ARTICLE BELOW DESCRIBES A DOUBLE ROLLER WITH A LIGHT FILTERING AND LIGHT BLOCKING SHADE. MANUALLY OPERATED SHADES WITH DOUBLE ROLLERS Chain-and-Clutch Operating Mechanisms: With continuous-loop bead chain and clutch that stops shade movement when bead chain is released; permanently adjusted and lubricated. Bead Chains: Manufacturer's standard. Loop Length: Full length of roller shade. Limit Stops: Provide upper and lower ball stops. Chain-Retainer Type: Clip, jamb mount. Spring Lift-Assist Mechanisms: Manufacturer's standard for balancing roller shade weight and for lifting heavy roller shades. Provide for shadebands that weigh more than 10 lb (4.5 kg) or for shades as recommended by manufacturer, whichever criterion is more stringent. Rollers: Corrosion-resistant steel or extruded-aluminum tubes of diameters and wall thicknesses required to accommodate operating mechanisms and weights and widths of shadebands indicated without deflection. Provide with permanently lubricated drive-end assemblies and idle-end assemblies designed to facilitate removal of shadebands for service. Double-Roller Mounting Configuration: Offset, outside roller over and inside roller under. Inside Roller: Drive-End Location: Right side of interior face of shade. Direction of Shadeband Roll: Regular, from back (exterior face) of roller. Outside Roller: Drive-End Location: Left side of interior face of shade. Direction of Shadeband Roll: Regular, from back (exterior face) of roller. Shadeband-to-Roller Attachment: Manufacturer's standard method. Mounting Hardware: Brackets or endcaps, corrosion resistant and compatible with roller mounting configuration, roller assemblies, operating mechanisms, installation accessories, and installation locations and conditions indicated. Inside Shadebands: Shadeband Material: Light-filtering fabric. Shadeband Bottom (Hem) Bar: Steel or extruded aluminum. Type: Enclosed in sealed pocket of shadeband material. Color and Finish: As indicated in Interior Finish Legend on Drawings. Outside Shadebands: Shadeband Material: Light-blocking fabric. Shadeband Bottom (Hem) Bar: Steel or extruded aluminum. Type: Enclosed in sealed pocket of shadeband material. Color and Finish: As indicated in Interior Finish Legend on Drawings. Installation Accessories: SELECT ONE OF THE NEXT TWO SUBPARAGHES RETAIN "FRONT FASCIA" BELOW FOR EXPOSED ROLLER ENCLOSURES. Front Fascia: Aluminum extrusion that conceals front and underside of roller and operating mechanism and attaches to roller endcaps without exposed fasteners. Shape: L-shaped. Height: Manufacturer's standard height required to conceal roller and shadeband assembly when shade is fully open, but not less than 4 inches (102 mm). RETAIN "RECESSED SHADE POCKET" SUBPARAGRAPH BELOW FOR ROLLER ENCLOSURE INSTALLED ABOVE THE CEILING. Recessed Shade Pocket: Rectangular, extruded-aluminum enclosure designed for recessed ceiling installation; with front, top, and back formed as one piece, end plates, and removable bottom closure panel. Height: Manufacturer's standard height required to enclose roller and shadeband assembly when shade is fully open, but not less than 6 inches (152 mm). Provide pocket with lip at lower edge to support acoustical ceiling panel. Endcap Covers: To cover exposed endcaps. Closure Panel and Wall Clip: Removable aluminum panel designed for installation at bottom of site-constructed ceiling recess or pocket and for snap-in attachment to wall clip without fasteners. Closure-Panel Width: 2 inches (51 mm). Side Channels: With light seals and designed to eliminate light gaps at sides of shades as shades are drawn down. Provide side channels with shadeband guides or other means of aligning shadebands with channels at tops. Bottom (Sill) Channel or Angle: With light seals and designed to eliminate light gaps at bottoms of shades when shades are closed. Installation Accessories Color and Finish: As selected from manufacturer's full range. THE ARTICLE BELOW DESCRIBES A LIGHT FILTERING OR LIGHT BLOCKING MOTORIZED SHADE. MOTOR-OPERATED, SINGLE-ROLLER SHADES Motorized Operating System: Provide factory-assembled, shade-operator system of size and capacity and with features, characteristics, and accessories suitable for conditions indicated, complete with electric motor and factory-prewired motor controls, power disconnect switch, enclosures protecting controls and operating parts, and accessories required for reliable operation without malfunction. Include wiring from motor controls to motors. Coordinate operator wiring requirements and electrical characteristics with building electrical system. Electrical Components: Listed and labeled as defined in NFPA70, by a qualified testing agency, and marked for intended location and application. Electric Motor: Manufacturer's standard tubular, enclosed in roller. Electrical Characteristics: 24-Vdc. Maximum Total Shade Width: As required to operate roller shades indicated. Maximum Shade Drop: As required to operate roller shades indicated. Maximum Weight Capacity: As required to operate roller shades indicated. Remote Control: Electric controls with NEMAICS6, Type1 enclosure for recessed or flush mounting. Provide the following for remote-control activation of shades: RETAIN ONE OR MORE OF FIRST FOUR SUBPARAGRAPHS BELOW OR REVISE TO SUIT PROJECT. INDIVIDUAL IS THE MOST COMMON FOR ROOMS, GROUP CONTROL IS USED FOR LOCATIONS LIKE LUNCHROOMS OR LOBBY SPACES. Individual Switch Control Station: Maintained-contact, wall-switch-operated control station with open, close, and center off functions. Switch Positions: Three. Switch Style: Toggle. Group Control Station: Maintained-contact, three-position, rocker-style, wall-switch-operated control station with open, close, and center off functions for single-switch group control. Individual/Group Control Station: Maintained-contact, three-position, rocker-style, wall-switch-operated control station with open, close, and center off functions for individual and group control. Color: As selected by Architect from manufacturer's full range. Crank-Operator Override: Crank and gearbox operate shades in event of power outage or motor failure. Limit Switches: Adjustable switches interlocked with motor controls and set to stop shades automatically at fully raised and fully lowered positions. EDIT BELOW TO MATCH PROJECT REQUIREMENTS. Operating Features: Group switching with integrated switch control; single faceplate for multiple switch cutouts. Capable of interface with [audiovisual] [multiroom] control system. Capable of accepting input from building automation control system. Rollers: Corrosion-resistant steel or extruded-aluminum tubes of diameters and wall thicknesses required to accommodate operating mechanisms and weights and widths of shadebands indicated without deflection. Provide with permanently lubricated drive-end assemblies and idle-end assemblies designed to facilitate removal of shadebands for service. Roller Drive-End Location: Right side of interior face of shade. Direction of Shadeband Roll: Regular, from back (exterior face) of roller. Shadeband-to-Roller Attachment: Manufacturer's standard method. Mounting Hardware: Brackets or endcaps, corrosion resistant and compatible with roller assembly, operating mechanism, installation accessories, and mounting location and conditions indicated. Shadebands: COORDINATE OPTION RETAINED IN "SHADEBAND MATERIAL" SUBPARAGRAPH BELOW WITH REQUIREMENTS SPECIFIED IN "SHADEBAND MATERIALS" ARTICLE. Shadeband Material: [Light-filtering fabric] [Light-blocking fabric]. Shadeband Bottom (Hem) Bar: Steel or extruded aluminum. Type: Enclosed in sealed pocket of shadeband material. Color and Finish: As indicated in Interior Finish Legend on Drawings. Installation Accessories: SELECT ONE OF THE NEXT THREE SUBPARAGHES RETAIN "FRONT FASCIA" OR "EXPOSED HEADBOX" SUBPARAGRAPH BELOW FOR EXPOSED ROLLER ENCLOSURES. RETAIN "EXPOSED HEADBOX" SUBPARAGRAPH FOR LIGHT-BLOCKING SHADES. Front Fascia: Aluminum extrusion that conceals front and underside of roller and operating mechanism and attaches to roller endcaps without exposed fasteners. Shape: L-shaped. Height: Manufacturer's standard height required to conceal roller and shadeband assembly when shade is fully open, but not less than 4 inches (102 mm). Exposed Headbox: Rectangular, extruded-aluminum enclosure including front fascia, top and back covers, endcaps, and removable bottom closure. Height: Manufacturer's standard in height required to enclose roller and shadeband assembly when shade is fully open, but not less than 4 inches (102 mm). RETAIN "RECESSED SHADE POCKET" SUBPARAGRAPH BELOW FOR ROLLER ENCLOSURE INSTALLED ABOVE THE CEILING. Recessed Shade Pocket: Rectangular, extruded-aluminum enclosure designed for recessed ceiling installation; with front, top, and back formed as one piece, end plates, and removable bottom closure panel. Height: Manufacturer's standard height required to enclose roller and shadeband assembly when shade is fully open, but not less than 6 inches (152 mm). Provide pocket with lip at lower edge to support acoustical ceiling panel. Endcap Covers: To cover exposed endcaps. Closure Panel and Wall Clip: Removable aluminum panel designed for installation at bottom of site-constructed ceiling recess or pocket and for snap-in attachment to wall clip without fasteners. Closure-Panel Width: 2 inches (51 mm). RETAIN "SIDE CHANNELS" AND "BOTTOM (SILL) CHANNEL OR ANGLE" SUBPARAGRAPHS BELOW FOR LIGHT-BLOCKING SHADES. Side Channels: With light seals and designed to eliminate light gaps at sides of shades as shades are drawn down. Provide side channels with shadeband guides or other means of aligning shadebands with channels at tops. Installation Accessories Color and Finish: As selected from manufacturer's full range. THE ARTICLE BELOW DESCRIBES A MOTORIZED DOUBLE ROLLER WITH A LIGHT FILTERING AND LIGHT BLOCKING SHADE. MOTOR-OPERATED, DOUBLE-ROLLER SHADES Motorized Operating Systems: Provide factory-assembled, shade-operator systems of size and capacity and with features, characteristics, and accessories suitable for conditions indicated, complete with electric motor and factory-prewired motor controls, power disconnect switch, enclosures protecting controls and operating parts, and accessories required for reliable operation without malfunction. Include wiring from motor controls to motors. Coordinate operator wiring requirements and electrical characteristics with building electrical system. Electrical Components: Listed and labeled as defined in NFPA70, by a qualified testing agency, and marked for intended location and application. IF REQUIRED, INSERT MANUFACTURERS' DESCRIPTION OF ALTERNATIVE MOTOR THAT IS AVAILABLE (FOR EXAMPLE, "QUIET OPERATION" MOTOR, AND SO FORTH) IN "ELECTRIC MOTOR" SUBPARAGRAPH BELOW. Electric Motor: Manufacturer's standard tubular, enclosed in rollers. Electrical Characteristics: 24-Vdc. Maximum Total Shade Width: As required to operate roller shades indicated. Maximum Shade Drop: As required to operate roller shades indicated. Maximum Weight Capacity: As required to operate roller shades indicated. Remote Control: Electric controls with NEMAICS6, Type1 enclosure for recessed or flush mounting. Provide the following for remote-control activation of shades: RETAIN ONE OR MORE OF FIRST FOUR SUBPARAGRAPHS BELOW OR REVISE TO SUIT PROJECT. INDIVIDUAL IS THE MOST COMMON FOR ROOMS, GROUP CONTROL IS USED FOR LOCATIONS LIKE LUNCHROOMS OR LOBBY SPACES. Individual Switch Control Station: Maintained-contact, wall-switch-operated control station with open, close, and center off functions. Switch Positions: Three. Switch Style: Toggle. Group Control Station: Maintained-contact, three-position, rocker-style, wall-switch-operated control station with open, close, and center off functions for single-switch group control. Individual/Group Control Station: Maintained-contact, three-position, rocker-style, wall-switch-operated control station with open, close, and center off functions for individual and group control. Color and Finish: As indicated in Interior Finish Legend on Drawings. Crank-Operator Override: Crank and gearbox operate shades in event of power outage or motor failure. Limit Switches: Adjustable switches, interlocked with motor controls and set to stop shade movement automatically at fully raised and fully lowered positions. EDIT BELOW TO MATCH PROJECT REQUIREMENTS. Operating Features: Group switching with integrated switch control; single faceplate for multiple switch cutouts. Capable of interface with [audiovisual] [multiroom] control system. Capable of accepting input from building automation control system. Rollers: Corrosion-resistant steel or extruded-aluminum tubes of diameters and wall thicknesses required to accommodate operating mechanisms and weights and widths of shadebands indicated without deflection. Provide with permanently lubricated drive-end assemblies and idle-end assemblies designed to facilitate removal of shades for service. Double-Roller Mounting Configuration: Offset, outside shade over and inside shade under. Inside Roller: Drive-End Location: Right side of interior face of shade. Direction of Shadeband Roll: Regular, from back (exterior face) of roller. Outside Roller: Drive-End Location: Left side of interior face of shade. Direction of Shadeband Roll: Regular, from back (exterior face) of roller. Shadeband-to-Roller Attachment: Manufacturer's standard method. Mounting Hardware: Brackets or endcaps, corrosion resistant and compatible with roller mounting configuration, roller assemblies, operating mechanisms, installation accessories, and installation locations and conditions indicated. Inside Shadebands: Shadeband Material: Light-filtering fabric. Shadeband Bottom (Hem) Bar: Steel or extruded aluminum. Type: Enclosed in sealed pocket of shadeband material. Color and Finish: As indicated in Interior Finish Legend on Drawings. Outside Shadebands: Shadeband Material: Light-blocking fabric. Shadeband Bottom (Hem) Bar: Steel or extruded aluminum. Type: Enclosed in sealed pocket of shadeband material. Color and Finish: As indicated in Interior Finish Legend on Drawings. Installation Accessories: SELECT ONE OF THE NEXT TWO SUBPARAGHES RETAIN "EXPOSED HEADBOX" SUBPARAGRAPH FOR LIGHT-BLOCKING SHADES. Exposed Headbox: Rectangular, extruded-aluminum enclosure including front fascia, top and back covers, endcaps, and removable bottom closure. Height: Manufacturer's standard height required to enclose roller and shadeband assembly when shade is fully open, but not less than 4 inches (102 mm). RETAIN "RECESSED SHADE POCKET" SUBPARAGRAPH BELOW FOR ROLLER ENCLOSURE INSTALLED ABOVE THE CEILING. Recessed Shade Pocket: Rectangular, extruded-aluminum enclosure designed for recessed ceiling installation; with front, top, and back formed as one piece, end plates, and removable bottom closure panel. Height: Manufacturer's standard height required to enclose roller and shadeband assembly when shade is fully open, but not less than 6 inches (152 mm). Provide pocket with lip at lower edge to support acoustical ceiling panel. Endcap Covers: To cover exposed endcaps. Closure Panel and Wall Clip: Removable aluminum panel designed for installation at bottom of site-constructed ceiling recesses or pockets and for snap-in attachment to wall clip without fasteners. Closure-Panel Width: 2 inches (51 mm). Side Channels: With light seals and designed to eliminate light gaps at sides of shades as shades are drawn down. Provide side channels with shadeband guides or other means of aligning shadebands with channels at tops. Bottom (Sill) Channel or Angle: With light seals and designed to eliminate light gaps at bottoms of shades when shades are closed. Installation Accessories Color and Finish: As selected from manufacturer's full range. SHADEBAND MATERIALS Shadeband Material Flame-Resistance Rating: Comply with NFPA701. Testing by a qualified testing agency. Identify products with appropriate markings of applicable testing agency. Light-Filtering Fabric: Woven fabric, stain and fade resistant. Source: Roller shade manufacturer. Type / Weave / Openness Factor: As indicated in Interior Finish Legend on Drawings. Orientation on Shadeband: Up the bolt unless otherwise indicated on Drawings. Color: As indicated in Interior Finish Legend on Drawings. Light-Blocking Fabric: Opaque fabric, stain and fade resistant. Source: Roller shade manufacturer. Type: As indicated in Interior Finish Legend on Drawings. Orientation on Shadeband: Up the bolt unless otherwise indicated on Drawings. Features: Washable. Color: As indicated in Interior Finish Legend on Drawings. ROLLER SHADE FABRICATION Product Safety Standard: Fabricate roller shades to comply with WCMAA100.1, including requirements for flexible, chain-loop devices; lead content of components; and warning labels. Unit Sizes: Fabricate units in sizes to fill window and other openings as follows, measured at 74 degF (23 degC): RETAIN "BETWEEN (INSIDE) JAMB INSTALLATION" OR "OUTSIDE OF JAMB INSTALLATION" SUBPARAGRAPH BELOW. ALTERNATIVELY, RETAIN BOTH SUBPARAGRAPHS AND INDICATE LOCATIONS OF EACH ON DRAWINGS OR IN A WINDOW-TREATMENT SCHEDULE. COORDINATE CLEARANCE REQUIREMENTS WITH DISTANCE BETWEEN SHADES AND GLASS, GLASS TYPE, AND PLACEMENT OF HEATING/COOLING AIR SUPPLIES TO AVOID HEAT BUILDUP AND POSSIBLE DAMAGE TO GLASS. IF RETAINING "BETWEEN (INSIDE) JAMB INSTALLATION" SUBPARAGRAPH, SEE "PRODUCT CHARACTERISTICS" ARTICLE IN THE EVALUATIONS FOR A DISCUSSION OF GANA RECOMMENDATIONS. Between (Inside) Jamb Installation: Width equal to jamb-to-jamb dimension of opening in which shade is installed less 1/4 inch (6 mm) per side or 1/2-inch (13-mm) total, plus or minus 1/8 inch (3.1 mm). Length equal to head-to-sill or -floor dimension of opening in which shade is installed less 1/4 inch (6 mm), plus or minus 1/8 inch (3.1 mm). IF RETAINING "OUTSIDE OF JAMB INSTALLATION" SUBPARAGRAPH BELOW, INDICATE LOCATIONS OF SHADES RELATIVE TO OPENINGS AND WIDTHS AND LENGTHS OF SHADES ON DRAWINGS OR IN A WINDOW-TREATMENT SCHEDULE. Outside of Jamb Installation: Width and length as indicated, with terminations between shades of end-to-end installations at centerlines of mullion or other defined vertical separations between openings. Shadeband Fabrication: Fabricate shadebands without battens or seams to extent possible, except as follows: Vertical Shades: Where width-to-length ratio of shadeband is equal to or greater than 1:4, provide battens and seams at uniform spacings along shadeband length to ensure shadeband tracking and alignment through its full range of movement without distortion of the material. EXECUTION EXAMINATION RETAIN OPTION IN FIRST PARAGRAPH BELOW FOR MOTORIZED OPERATORS. Examine substrates, areas, and conditions, with Installer present, for compliance with requirements for installation tolerances, operational clearances, [locations of connections to building electrical system,]and other conditions affecting performance of the Work. Proceed with installation only after unsatisfactory conditions have been corrected. ROLLER SHADE INSTALLATION Install roller shades level, plumb, and aligned with adjacent units according to manufacturer's written instructions. Opaque Shadebands: Located so shadeband is not closer than 2 inches (51 mm) to interior face of glass. Allow clearances for window operation hardware. RETAIN "ELECTRICAL CONNECTIONS" PARAGRAPH BELOW FOR MOTOR-OPERATED ROLLER SHADES. Electrical Connections: Connect motor-operated roller shades to building electrical system. Roller Shade Locations: As indicated on Drawings. ADJUSTING Adjust and balance roller shades to operate smoothly, easily, safely, and free from binding or malfunction throughout entire operational range. CLEANING AND PROTECTION Clean roller shade surfaces, after installation, according to manufacturer's written instructions. Provide final protection and maintain conditions, in a manner acceptable to manufacturer and Installer, that ensure that roller shades are without damage or deterioration at time of Substantial Completion. Replace damaged roller shades that cannot be repaired, in a manner approved by Architect, before time of Substantial Completion. DEMONSTRATION RETAIN THIS ARTICLE FOR MOTORIZED ROLLER SHADES. Engage a factory-authorized service representative to train Owner's maintenance personnel to adjust, operate, and maintain motor-operated roller shades. END OF SECTION 12 24 13 FOR MDACC USE ONLY. DELETE THIS PAGE BEFORE ISSUING DOCUMENTS. document revision history IssueDateRevision DescriptionAuthor20190301Original IssuanceRev. 1.Rev. 2Rev. 3 Rev. 4 Rev. 5      MD ANDERSON Project No. XXXXXXMD ANDERSON PROJECT NAMEA/E Name Issue Description A/E Project No.Month 00, 0000 鶹ӳ roller window shades MD Anderson Cancer Center12 24 13 MS 20190301 PAGE 7 of  NUMPAGES 15 % F L O U 0 8 6 ' =FO9BKLU^i,J»»ګ楟斍楟楟楟憂hFC hFChFCh@wh;)0J/h@wh;)0J0 h;)0J/ h;)0J0h{h;);<CJh! hrhr hrh;) h;)5h{hr;<CJh{hM;<CJh;) h;)0J. hM0J- h$6J0J-h$6J3&.@ ` ( 6 ' Vgd!)gd{gd!gd{gd{gd e <,Vg|JSgd!gd{gd!gd!J-.fghvw   XYZqrtu+,-.<=,-ѕ~rh{h5A;<CJh{hM;<CJ h &h{h{h9jh9h9Ujh9h9Ujh9h9Ujh9h9U h &h9jh9h9U h9h9jh9h9Uh;)h!,-t.=-Z/Z1!^!!!"gd{)gd{gd!gd!gd{gd{-;<=X]bk6!7!8!\!z!{!|!!!!!!""""!#"###R#e#f#g#j#####$$$$$$$$G%O%X%Z%%%'ȼȰȰȰhBh;)0J/hBh;)0J0 h,\Zh;)h,\Zh{h;);<CJh{h(:;<CJh{hM;<CJ hBh;)hBhrh;)0J/hrh;)0J0 h@Oh;)h;)h@O9"""#T####$$$Z%%&!'l''W(((4)a)*6*a*gd{)gd{gd{gd!gd!'''l''j(l(m(u(}((((((3)4)***4*B*C*D*_*****d+i+r+G-I-J-}--------.7.9.:.].{.|.}......///0˿ꫢ hGPh;)hGPhBh;)0J/hBh;)0J0 hBh;)hBh{h02;<CJh{hM;<CJ hLth;)hLth,\ZhJPth;)h,\Zh;)0J/h,\Zh;)0J0;a***8++#----.%._...//0K0000 1B1z1112)gd{gd!gd!gd{0P0Q0R0000000001G1H1I1x1z1111122<2=22222s3{33333:5B5K55566666384858_8a88ӻӻh:hJPth:h;)0J/h:h;)0J0hh;)0J/hh;)0J0 hh;)hh{h;);<CJh{h:;<CJh{hM;<CJ hdeh;) h@Ohdehde hGPh;)hGPh;)32=222334M555667 8a888:;;;D<<<v=gd!gd{gd{gd!)gd{88;;;;;;;;<<<B<W<X<Y<<<<<<=,=v===3>4>V>W>X>b>>>>>>>>>????????v@w@x@@AAAcBnBqBzBEDFDζζ h;)5 hL'h;)hL' hgWh;)hgWh{hgW;<CJh{h;);<CJh{hM;<CJ h02h;)h02 h~4h;)h~4h;)h{h+;<CJ=v==4>>>>?谪@AAABB+DDEEFF!!!)ҶDDDDDDDEܹFFFFFFҳGG'(HHHHڱDZJJJJJճ峢LLM󴳱ʳ5󴳱ʳ;)0/󴳱ʳ;)00۴>;)0/۴>;)00$;<CJ h@Ohdehde hYf>h;)hYf>hL' h;)5h{h;);<CJh{hM;<CJhgW hgWh;)h;)3GGGaGG(HHHqIIJJKaLLLMM*NO]OOORRSSgd{gd!)gd{gd!gd{MMMMM)N*N/O0O1O[O]OOORRSSSbScSdS{SSSSSSSS TT T!TOTiTjTkTTTT>UUUUUVV V*VVVVVVVVVVVVVWWWW8X޻ޤޤh{hli;<CJ hlih;)hlih{h$;<CJ h~4h;)h~4h{h;);<CJh{hM;<CJhJPth;)0J/hJPth;)0J0h;)@SSSS TQTT>UUUVVVqW8XXXYYYZcZZ[X\g\\gd!gd!)gd{gd{gd!8XKXNXXYYY:ZEZHZQZ"\$\%\V\z\{\|\\\\\\]]]6]T]U]V]]]]]]^^^^)_*_+_Z_\_o_r______ `!`"`Q`S`f`i`````aa/b7bh,h;)0J0h{h;);<CJh{h5;<CJ h,h;)h, h;)5h{hli;<CJh{hM;<CJh;) h@OhdehdeA\\\8]]]^^^$_\____`S````aaBbbqc dTd}d)gd{gd!gd!gd{7b@bBbbbccdTd}dUeWeXe`ehefffglgtg.h/h0hIhOhihkhlhohhhhhhhhhhh*iqirisiiiiiiijjj!j"j#j+j-j󭦭 h,ha;4 ha;4h;) h@Oh, h@Oha;4ha;4 hL'h;)hL' hdeh;) h,h;)h,h5h,h;)0J0h{h;);<CJh{hM;<CJh;)h,h;)0J/9}dBejeEff g4gg'hKhhh*ijiiij-jhjj8kk=mm:o)gd{gd!gd{gd{gd!-j4j7jhjkkkk{?{ǿ~zpppfha&;\]^JhM;\]^JhM hMha&h$6JhMhM;\]^Jhd\]^JhMhMB*\]^JphhMhM\]^Jh`Zjh`ZUh;)h`(5\]^Jh h 5\]^Jh h ;CJ\]^Jhmh ;<\]^J&yyyyyy\QQQQ $1$Ifgd kd$$IfTl\ \$ ,$$<0#44 layt`(TyyyyyyZOOOO $1$Ifgd kd/$$IfTl\ \$ ,$$<0#44 layt`(Tyyyyzz\QQQQ $1$Ifgd kd$$IfTl\ \$ ,$$<0#44 layt`(Tzz z z z zZOOOO $1$Ifgd kd{$$IfTl\ \$ ,$$<0#44 layt`(T zzzzzz\QQQQ $1$Ifgd kd#$$IfTl\ \$ ,$$<0#44 layt`(TzzzzzzZOOOO $1$Ifgd kd$$IfTl\ \$ ,$$<0#44 layt`(Tzzz z!z"z\QQQQ $1$Ifgd kdo$$IfTl\ \$ ,$$<0#44 layt`(T"z#z+z,z-z.zZOOOO $1$Ifgd kd $$IfTl\ \$ ,$$<0#44 layt`(T.z/z0z1z2z3z\QQQQ $1$Ifgd kd $$IfTl\ \$ ,$$<0#44 layt`(T3z4zz?zZOOOO $1$Ifgd kd_ $$IfTl\ \$ ,$$<0#44 layt`(T?z@zAzBzCzDz\QQQQ $1$Ifgd kd $$IfTl\ \$ ,$$<0#44 layt`(TDzEzMzNzOzPzZOOOO $1$Ifgd kd $$IfTl\ \$ ,$$<0#44 layt`(TPzQzRzSzTzUz\QQQQ $1$Ifgd kdS $$IfTl\ \$ ,$$<0#44 layt`(TUzVzWzYzZz\z]z_z`zbzZRPPPPPPP & Fgd kd $$IfTl\ \$ ,$$<0#44 layt`(T bzczzzzzz~ $$1$Ifa$gdMSkd $$IfTH0$64 Hayt@T$ !$1$Ifa$gdM $1$IfgdMzzzzzzz@;;2gdMSkdi$$IfTH0$64 Hayt@T $$1$Ifa$gdd $1$IfgdMSkd$$IfTH0$64 Hayt@Tzzzz {{({2{Okd$$IfHU0$ (# 4#4 Halyt  $$1$Ifa$gdM $1$IfgdM2gd$6J2{3{?{]{^{_{`{FA<4gd$6J4gdMOkd$$IfHU0$ (# &4#4 Halyt  $$1$Ifa$gdM $1$Ifgd{Okd5$$IfHU0$ (# 4#4 Halyt ?{@{F{G{H{I{M{N{X{Y{[{\{]{^{_{`{a{b{Ѿᡚh;)h`Zh$6J hMh$6JhMhM\]^J!h5/;\]^JmHnHu*%jhMhM;U\]^J*h5/;\]^JmHnHuhMhM;\]^J"jhMhM;U\]^J`{a{b{ & Fgd 91:p@<0BP/ =!"#8$% DyK yK nhttp://www.specagent.com/Lookup?ulid=12336yX;H,]ą'cDyK yK zhttp://www.specagent.com/Lookup?uid=123457025558yX;H,]ą'cDyK yK zhttp://www.specagent.com/Lookup?uid=123457025559yX;H,]ą'cDyK yK zhttp://www.specagent.com/Lookup?uid=123457025561yX;H,]ą'cDyK yK zhttp://www.specagent.com/Lookup?uid=123457025562yX;H,]ą'c$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(T$$If!vh#v<#v#v#v:V l0#5<555ayt`(Tc$$If!vh#v#v:V H65544 Hyt@Tc$$If!vh#v#v:V H65544 Hyt@Tc$$If!vh#v#v:V H65544 Hyt@Te$$Ifl!vh#v #v4:V HU#5 5444 Halyt e$$Ifl!vh#v #v4:V HU#5 5444 Halyt q$$Ifl!vh#v #v4:V HU#,5 54944 Halyt >s666666666vvvvvvvvv666666>6666666666666666666666666666666666666666666666666hH6666666666666666666666666666666666666666666666666666666666666666662&6FVfv2(&6FVfv&6FVfv&6FVfv&6FVfv&6FVfv&6FVfv8XV~ 0@ 0@ 0@ 0@ 0@ 0@ 0@ 0@ 0@ 0@ 0@ 0@ 0@ 0@_HmH nH sH tH D`D NormalOJQJ^J_HmH sH tH DA`D Default Paragraph FontRi@R 0 Table Normal4 l4a (k ( 0No List 88 HDR$*$a$CJ44 FTR$*$a$CJ4O"4 SCT$*$a$5@O"@ PRT$$ & F*$@&a$5:b: SUT$ & F*$@&a$:b: DST$ & F*$@&a$<OR< ART$$ & F*$@&a$:Ob: =PR1$ & F*$@&a$>Or> PR2$ & F *$@&a$6O6 PR3$ & F*$@&a$6O6 PR4$ & F*$@&a$66 PR5$ & F*$@&a$0b0 TB1*$^ a$0r0 TB2*$^`a$00 TB3*$^a$00 TB4*$^a$00 TB5*$^ a$00 TF1 *$^ a$00 TF2!*$^`a$00 TF3"*$^a$00 TF4#*$^a$00 TF5$*$^ a$&R& TCH%*$.b. TCE &*$^`p4Or4 EOS'$*$a$5<< ANT (*$a$<>*B* ph@O@ 7M0CMT)$*$a$5<B*ph CPR SPN SPDO NUMO NAM&o& SI B*ph&o& IP B*ph** RJUST1a$4@"4 3}40Header 2H$.1. 2}40 Header Char4 @B4 5}40Footer 4H$.Q. 4}40 Footer Char\b\ 8bTIP26NOPQ B* ph8D/qD )MCMT Char5<B*OJQJ^Jph4/4 6bTIP Char <B* ph8:/: EL SAhyperlink >*B*phl 6U 6 EL0 Hyperlink >*B*ph <@wOMN[;x$d%d&d'd-DM NOPQ <B*CJOJQJ^JaJphAAAZ/Z ;@wOMN Char1<B*CJOJQJ^JaJfHphAAAq 4/4 BPR1 Char OJQJ^JPK![Content_Types].xmlN0EH-J@%ǎǢ|ș$زULTB l,3;rØJB+$G]7O٭Vc:E3v@P~Ds |w< bs    J'08FDM8X7b-jXy?{b{>ACEGIKMOQSVi"a*2v=GSS\}d:o?yyyyz zzz"z.z3z?zDzPzUzbzzz2{`{b{?@BDFHJLNPRTUWXYZ[\]^_`abcdefghj-gv Yqt+bsXXXXX !ttL# @0(  B S  ?ptBookmark12336-cs=csDEs!scs s'scs>*urn:schemas-microsoft-com:office:smarttags PostalCode=*urn:schemas-microsoft-com:office:smarttags PlaceType   > G .:=G`bhrkt@ID#N#g#i#o$y$ %%%%l&u&&&''''((o(x((((( ))f)o)4+=+,-8/A/d/n/q:z:w;;<<z<<<<==J>S>>>>>A(AyAAHBQBDDFFFFHRQRNSXSTTEUNUUUVVVVVVHWQWWWWWWW?XHX$Y+YYY[[]^#^-^4_=_``aacccchhhhdimiiiiiiillllqqWrYrZr\r]r_r`rbrcr?sIsMs\s`scs F0T0BGPG__bblkrkuooWrYrZr\r]r_r`rbrcr`scs333333333&&@@5' + Itt-<==,Z 3!)**<*++a00v55536p8p899=I>?'BBDE)ճGJ鰭>MMM88QQXXXZհ__`````粹aaa!"##++-cs?sIsMs\s^s_scs@@5' + Itt-<==,Z 3!)**<*++a00v55536p8p899=I>???'BBE)ճGJ鰭>MMM88QQXXXZcs?sIsMs\s^s^scs̃, PART -  SCHEDULE  - PRODUCT DATA SHEET  - ``^``.``^``.^`.^`.  ^ `)` ` ^` `)      PA&Q&Raӹ&TaՏ VaaX&?,RoSs  ?PA&Q&Raӹ&TaՏ VaaX&kn[H,:d J)m5i+% &a&`(;)*+e+/5/a;4}4~4"+5Vh7(:Yf>5AB ?BFCb)F$6J@OOX,\ZW]^lad-)edeliC"nrDsLtJPtv)w@wqoz`Zx/3TBSM@w0hv`7$ELY |5yngWy{02GP2T9?8PqEL'@wy~!bWrYrDOIFormatMF04MF95MFOrigin SectionIDSpecTypeVersion09/01/14112241312494MF04372 MasterSpec10153@bs@UnknownG.[x Times New Roman5Symbol3. .Cx ArialA$BCambria Math"1hh\t)Ga:Ga:%rrJqHP  $P}42!xx %SECTION 122413 - ROLLER WINDOW SHADESROLLER WINDOW SHADESBAS-12345-MS80Fitzgerald,Richard W Oh+'0 4@ ` l x(SECTION 122413 - ROLLER WINDOW SHADESROLLER WINDOW SHADESBAS-12345-MS80NormalFitzgerald,Richard W41Microsoft Office Word@\"@Znvz@IGa/TRG/odgCollaboration/_layouts/1 &SECTION 122413 - ROLLER 5/DocIdRedir.aspx?ID=SZWXXFYDWACR-487-713, SZWXXFYDWACR-487-713 ;#Master;#2019-03-01T0JTOXEEEYFEK3SN==2uU`uU`Item 22PropertiesQ <  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkmnopqrstvwxyz{|}~Root Entry FU`Data l1Tableu:WordDocument ;SummaryInformation(DocumentSummaryInformation87MsoDataStore uU`uU`0E2CTS0GG1FFA==2uU`uU`Item  x.PropertiesCompObj r4QRSOGCGLAA==2 uU`uU` !"#%'()+,-/01345689:;<=>? 6/bibliography" SelectedStyle="\APASixthEditionOfficeOnDocument ID GeneratorSynchronous100011000Microsoft.Office.DocumentManagement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429cMicrosoft.Office.DocumentManagement.Internal.DocIdHandler<  F Microsoft Word 97-2003 Document MSWordDocWord.Document.89qFilter>Document ID GeneratorSynchronous100021001Microsoft.Item  eProperties LOREGUSI==2uU`uU`Item $Properties&NQC2UGWVFQ==2uU`uU`Item *Properties./xsd:simpleType> This value indicates the number of saves or revisions. The application is responsible for updating this value after each revision. Office.DocumentManagement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429cMicrosoft.Office.DocumentManagement.Internal.DocIdHandlerDocument ID GeneratorSynchronous100041002Microsoft.Office.DocumentManagement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429cMicrosoft.Office.DocumentManagement.Internal.DocIdHandlerDocument ID GeneratorSynchronous100061003Microsoft.Office.DocumentManagement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429cMicrosoft.Office.DocumentManagement.Internal.DocIdHandlernchronization>10004 agement.Internal.DocIdHandler ds:itemID="{BAA50C35-A0E0-4171-A95A-457C905CF0A5}" xmlDocumentLibraryFormDocumentLibraryFormDocumentLibraryFormenxmlformats.org/officeDocument/2006/ sion="1.0" encoding="UTF-8" standalone="no"?> gProperties"/> ՜.+,D՜.+,l( px  AVITRU, LLC.X:r &SECTION 122413 - ROLLER WINDOW SHADES Title, X$P  _PID_HLINKS _dlc_DocId_dlc_DocIdItemGuid_dlc_DocIdUrlStatus Published Date to External Site CSI Division Ready to PublishAEZ 1http://www.specagent.com/Lookup?uid=123457025562EY 1http://www.specagent.com/Lookup?uid=123457025561FQ1http://www.specagent.com/Lookup?uid=123457025559FP1http://www.specagent.com/Lookup?uid=123457025558p6+http://www.specagent.com/Lookup?ulid=12336SZWXXFYDWACR-487-713%9a431120-9070-405f-8129-6c7f7a2fcec8thttp://fm/groups/cpm